\documentclass{sig-alternate}

\usepackage{tikz}
\usetikzlibrary{arrows}
\usetikzlibrary{trees}
\usetikzlibrary{positioning}

\usepackage{array}
\usepackage{amstext}
\usepackage{mathtools}
\DeclarePairedDelimiter{\ceil}{\lceil}{\rceil}

\begin{document}

\title{IPFS - Content Addressed, Versioned, P2P File System (DRAFT 2)}
\subtitle{}

\numberofauthors{1}

\author{
\alignauthor
  Juan Benet\\
  \email{juan@benet.ai}
}

\maketitle
\begin{abstract}
The InterPlanetary File System is a peer-to-peer distributed file system
capable of sharing the same files with millions of nodes. IPFS combines a
distributed hashtable, cryptographic techniques, merkle trees, content-
addressable storage, bittorrent, and tag-based filesystems to build a single
massive file system shared between peers. IPFS has no single point of failure,
and nodes do not need to trust each other.
\end{abstract}

\section{Introduction}

[Motivate IPFS. Introduce problems. Describe BitTorrent existing problems (
multiple files. one swarm. sloppy dht implementation.) Describe version
control efforts. Propose potential combinations of good ideas.]

[Cite:
CFS,
Kademlia,
Bittorrent,
Chord,
DHash,
SFS,
Ori,
Coral]

This paper introduces
IPFS, a novel peer-to-peer version-controlled filesystem;
and BitSwap, the novel peer-to-peer block exchange protocol serving IPFS.

%The rest of the paper is organized as follows.
%Section 2 describes the design of the filesystem.
%Section 3 evaluates various facets of the system under benchmark and common
%workloads.
%Section 4 presents and evaluates a world-wide deployment of IPFS.
%Section 5 describes existing and potential applications of IPFS.
%Section 6 discusses related and future work.

Notation Notes:
(a) data structures are specified in Go syntax,
(b) rpc protocols are specified in capnp interfaces,
(c) wire protocols are specified in capnp schemas.

\section{Background}

This section reviews important properties of successful peer-to-peer systems, which IPFS combines.

\subsection{Distributed Hash Tables}

Distributed Hash Tables (DHTs) are widely used to coordinate and maintain metadata about peer-to-peer systems. For example, the BitTorrent MainlineDHT tracks sets of peers part of a torrent swarm.

\subsubsection{Kademlia DHT}

Kademlia \cite{Kademlia} is a popular DHT that provides:

\begin{enumerate}

  \item Efficient lookup through massive networks:
        queries on average contact $ \ceil{log_2 (n)} $ nodes.
        (e.g. $20$ hops for a network of $10,000,000$ nodes).

  \item Low coordination overhead: it optimizes the number of
        control messages it sends to other nodes.

  \item Resistance to various attacks, by preferring nodes who have been
        part of the DHT longer.

  \item wide useage in peer-to-peer applications, including \\
        Gnutella and Bittorrent, forming networks of over 100 million nodes.

 \end{enumerate}


\subsubsection{Coral DSHT}

While some peer-to-peer filesystems store data blocks directly in DHTs,
this ``wastes storage and bandwidth, as data must be stored at nodes where it
is not needed'' \cite{Coral}. Coral extends Kademlia in three particularly important ways:

\begin{enumerate}

  \item Kademlia stores values in nodes whose ids are ``nearest'' (using
        XOR-distance) to the key. This does not take into account application
        data locality, ignores ``far'' nodes who may already have the data, and
        forces ``nearest'' nodes to store it, whether they need it or not.
        This wastes significant storage and bandwith. Instead, Coral stores
        addresses to peers who can provide the data blocks.

  \item Coral relaxes the DHT API from \texttt{get\_value(key)} to
        \texttt{get\_any\_values(key)} (the ``sloppy'' in DSHT).
        This still works since Coral users only need a single (working) peer,
        not the complete list. In return, Coral can distribute only subsets of
        the values to the ``nearest'' nodes, avoiding hot-spots (overloading
        \textit{all the nearest nodes} when a key becomes popular).

  \item Additionally, Coral organizes a hierarchy of separate DSHTs called
        \textit{clusters} depending on region and size. This enables nodes to
        query peers in their region first, ``finding nearby data without
        querying distant nodes'' and greatly reducing the latency of
        lookups.

\end{enumerate}

\subsubsection{S/Kademlia DHT}

S/Kademlia extends Kademlia to protect against malicious attacks:

\begin{enumerate}

  \item S/Kademlia provides schemes to secure \texttt{NodeId} generation,
        and prevent Sybill attacks. It requires nodes to create a PKI key pair, derive their identity from it, and sign their messages to each other. One scheme includes a proof-of-work crypto puzzle to make generating Sybills expensive.

  \item S/Kademlia nodes lookup values over disjoint paths, in order to
        ensure honest nodes can connect to each other in the presence of a large fraction of adversaries in the network. S/Kademlia achieves a success rate of 0.85 even with an adversarial fraction as large as half of the nodes.

\end{enumerate}

\subsection{Block Exchanges - BitTorrent}

BitTorrent \cite{BitTorrent} is a widely successful peer-to-peer filesharing system, which succeeds in coordinating networks of untrusting peers (swarms) to cooperate in distributing pieces of files to each other. Key BitTorrent features that inform IPFS design:

\begin{enumerate}
  \item BitTorrent's data exchange protocol uses a quasi tit-for-tat strategy
        which rewards nodes that contribute to each other, and punishes nodes who would only leech others' resources.

  \item BitTorrent peers track the availability of file pieces, prioritizing
        sending rarest-first. This takes load off seeds, making non-seed peers capable of trading with each other.

  \item BitTorrent's standard tit-for-tat is vulnerable to some exploitative
        bandwidth sharing strategies. PropShare \cite{propshare} is a different peer bandwidth allocation strategy that better resists exploitative strategies, and improves the performance of swarms.

\end{enumerate}

\subsection{Version Control Systems - Git}

Version Control Systems provide facilities to model files changing over time and distribute different versions efficiently. The popular version control system Git provides a powerful Merkle DAG \footnote{Merkle Directed Acyclic Graph -- similar but more general construction than a Merkle Tree. Deduplicated, does not need to be balanced, and non-leaf nodes contain data.} object model that captures changes to a filesystem tree in a distributed-friendly way.

\begin{enumerate}
  \item Immutable objects represent Files (\texttt{blob}), Directories (\texttt{tree}), and Changes (\texttt{commit}).
  \item Objects are content-addressed, by the cryptographic hash of their contents.
  \item Links to other objects are embedded, forming a Merkle DAG. This
  provides many useful integrity and workflow properties.
  \item Most versioning metadata (branches, tags, etc) are simply pointer references, and thus inexpensive to create and update.
  \item Version changes only update references or add objects.
  \item Distributing version changes to other users is simply transferring objects and updating remote references.
\end{enumerate}


\section{Design}

IPFS is a distributed file system which synthesizes successful ideas from previous peer-to-peer sytems, including DHTs, BitTorrent, Git, and SFS. The contribution of IPFS is simplifying, evolving, and connecting proven techniques into a single cohesive system, greater than the sum of its parts. IPFS presents a new platform for writing and deploying applications, a new system for distributing and versioning large data, and could evolve the web itself.

IPFS is peer-to-peer; no nodes are privileged. IPFS nodes store IPFS objects in local storage. Nodes connect to each other and transfer objects. These objects represent files and other data structures. The IPFS Protocol is divided into a stack of sub-protocols responsible for different functionality:

\begin{enumerate}
  \item \textbf{Identities} - manages node identity generation and verification. Described in Section 3.1.

  \item \textbf{Network} - manages connections to other peers, using various underlying network protocols. Configurable. Described in Section 3.2.

  \item \textbf{Routing} - maintains information to locate specific peers and objects. Responds to both local and remote queries. Defaults to a DHT, but is swappable. Described in Section 3.3.

  \item \textbf{Exchange} - a novel block exchange protocol (BitSwap) that governs efficient block distribution. Modelled as a market, weakly intentivizes replication. Trade Strategies swappable. Described in Section 3.4.

  \item \textbf{Objects} - a Merkle DAG of content-addressed immutable objects with links. Used to represent arbitrary datastructures, e.g. file hierarchies and communication systems. Described in Section 3.5.

  \item \textbf{Files} - versioned file system hierarchy, inspired by Git. Described in Section 3.6.

  \item \textbf{Naming} - A self-certifying mutable name system. Described in Section 3.7.
\end{enumerate}


These subsystems are not independent; they are integrated and leverage
blended properties. However, it is useful to describe them separately,
building the protocol stack from the bottom up.


\subsection{Identities}

Nodes are identified by a \texttt{NodeId}, the cryptographic hash\footnote{throughout this document, \textit{hash} and \textit{checksum} refer specifically to cryptographic hash checksums of data} of a public-key, created as in \cite{skademlia}. Nodes store their public and private keys (encrypted with a passphrase). Users are free to instatiate a ``new'' node identity on every launch, though that loses accrued network benefits. Nodes are incentivized to remain the same.

\begin{verbatim}
      type NodeId Multihash
      type Multihash []byte
      // self-describing cryptographic hash digest

      type PublicKey []byte
      type PrivateKey []byte
      // self-describing keys

      type Node struct {
        nodeid NodeID
        pubkey PublicKey
        prikey PrivateKey
      }
\end{verbatim}

Upon first connecting, peers exchange public keys, and check: \texttt{hash(other.PublicKey) equals other.NodeId}. If not, the connection is terminated.

\paragraph{Note on Cryptographic Functions} Rather than locking the system to a particular set of function choices, IPFS favors self-describing values. Hash digest values are ``multihashes'', a format including a short header identifying the hash function used, and the digest length in bytes. Example:

\begin{verbatim}
    <function code><digest length><digest bytes>

\end{verbatim}

This allows the system (a) chose the best function for the use case (e.g. stronger security vs faster performance), and (b) evolve as function choices change. Self-describing values allow using different parameter choices compatibly.

\subsection{Network}

IPFS nodes communicate regualarly with hundreds of other nodes in the network, across the wide internet. IPFS can use any reliable transport protocol, and is best suited for WebRTC DataChannels \cite{WebRTC} (for browser connectivity) or uTP \cite{uTP} (LEDBAT) \cite{LEDBAT}. IPFS also uses the ICE NAT traversal techniques \cite{ICE} to increase connectivity between peers.

\begin{itemize}
  \item \textbf{Reliability:} IPFS can provide reliability if underlying networks do not provide it, using uTP or SCTP.
  \item \textbf{Integrity:} optionally checks integrity of messages using a hash checksum.
  \item \textbf{Authenticity:} optionally checks authenticity of messages using HMAC with sender's public key.
\end{itemize}

\subsection{Routing}

IPFS nodes require a routing system that can find (a) other peers' network addresses and (b) peers who can serve particular objects. IPFS achieves this using a DSHT based on S/Kademlia and Coral, using the properties discussed in 2.1. The size of objects and use patterns of IPFS are similar to Coral \cite{Coral} and Mainline \cite{Mainline}, so references are stored in the DHT instead of entire blocks. References are the \texttt{NodeIds} of peers who can serve the block.

The interface of this DSHT is:

\begin{verbatim}
    routing.findPeer(NodeId)
    // gets a particular peer's network address

    routing.findValuePeers(Multihash, int)
    // gets a number of peers serving a value.

    routing.provideValue(Multihash)
    // announces that this node can serve a value.
\end{verbatim}

Note: different use cases will call for substantially different routing systems (e.g. DHT in wide network, static HT in local network). Thus the IPFS routing system can be swapped for one to fit the users' needs. As long as the interface above is met, the rest of the system will continue to function.

\subsection{Block Exchange - BitSwap Protocol}

The exchange of data in IPFS happens by exchanging blocks with peers using a
BitTorrent inspired protocol: BitSwap. Like BitTorrent, BitSwap peers are
looking to acquire a set of blocks, and have blocks to offer in exchange.
Unlike BitTorrent, BitSwap is not limited to the blocks in one torrent.
BitSwap operates as a persistent marketplace where node can acquire the
blocks they need, regardless of what files the blocks are part of. The
blocks could come from completely unrelated files in the filesystem.
But nodes come together to barter in the marketplace.

While the notion of a barter system implies a virtual currency could be
created, this would require a global ledger to track ownership
and transfer of the currency. This can be implemented as a BitSwap Strategy, and will be explored in a future paper.

In the base case, BitSwap nodes have to provide direct value to each other
in the form of blocks. This works fine when the distribution of blocks across
nodes is such that they have complements, what each other wants. This will
seldom be the case. Instead, it is more likely that nodes must \textit{work}
for their blocks. In the case that a node has nothing that its peers want (or
nothing at all), it seeks the pieces its peers want, with lower
priority than what the node wants itself. This incentivizes nodes to cache and
disseminate rare pieces, even if they are not interested in them directly.

\subsubsection{BitSwap Credit}

The protocol must also incentivize nodes to seed when they do not need
anything in particular, as they might have the blocks others want. Thus,
BitSwap nodes send blocks to their peers optimistically, expecting the debt to
be repaid. But, leeches (free-loading nodes that never share) must be protected against. A simple credit-like system solves the problem:

\begin{enumerate}
  \item Peers track their balance (in bytes verified) with other nodes.
  \item Peers send blocks to debtor peers probabilistically, according to
        a function that falls as debt increases.
\end{enumerate}

Note that if a peer decides not to send, the peer subsequently ignores the
other node for an \texttt{ignore\_cooldown} timeout. This prevents senders
from trying to game the probability by just causing more dice-rolls.
(Default BitSwap is 10 seconds).

\subsubsection{BitSwap Strategy}

The differing strategies that BitSwap peers might employ have wildly different effects on the performance of the exchange as a whole. In BitTorrent, while a standard strategy is specified (tit-for-tat), a variety of others have been implemented, ranging from BitTyrant \cite{BitTyrant} (sharing the least-possible), to BitThief \cite{BitThief} (exploiting a vulnerability and never share), to PropShare \cite{PropShare} (sharing proportionally). A range of strategies (good and malicious) could similarly be implemented by BitSwap peers. The choice of function, then, should aim to:

\begin{enumerate}
  \item maximize the trade performance for the node, and the whole exchange
  \item prevent freeloaders from exploiting and degrading the exchange
  \item be effective with and resistant to other, unknown
  strategies
  \item be lenient to trusted peers
\end{enumerate}

The exploration of the space of such strategies is future work.
One choice of function that works in practice is a sigmoid, scaled by a
\textit{debt retio}:

Let the \textit{debt ratio} $ r $ between a node and its peer be:
  \[ r = \dfrac{\texttt{bytes\_sent}}{\texttt{bytes\_recv} + 1} \]

Given $r$, let the probability of sending to a debtor be:
  \[ P\Big( \; send \; | \; r \;\Big) = 1 - \dfrac{1}{1 + exp(6-3r)} \]

\begin{figure}
\centering
\begin{tikzpicture}[domain=0:4]

    \draw[->] (-0,0) -- (4.2,0) node[right] {$r$};
    \draw[->] (0,-0) -- (0,1.20) node[above] {$P(\;send\;|\;r\;)$};

    %ticks
    \foreach \x in {0,...,4}
      \draw (\x,1pt) -- (\x,-3pt)
        node[anchor=north] {\x};

    \foreach \y in {1,...,1}
      \draw (1pt,\y) -- (-3pt,\y)
        node[anchor=east] {\y};

    \draw[color=red] plot[] function{1 - 1/(1+exp(6-3*x))};

\end{tikzpicture}
\caption{Probability of Sending as $r$ increases}
\label{fig:psending-graph}
\end{figure}

As you can see in Figure \ref{fig:psending-graph}, this function drops off quickly as the nodes' \
\textit{debt ratio} surpasses twice the established credit.
The \textit{debt ratio} is a measure of trust:
lenient to debts between nodes that have previously exchanged lots of data
successfully, and merciless to unknown, untrusted nodes. This
(a) provides resistance to attackers who would create lots of new nodes
(sybill attacks),
(b) protects previously successful trade relationships, even if one of the
nodes is temporarily unable to provide value, and
(c) eventually chokes relationships that have deteriorated until they
improve.


% \begin{center}
% \begin{tabular}{ >{$}c<{$} >{$}c<{$}}
%   P(\;send\;|\quad r) \;\;\;\;\;&  \\
%   \hline
%   \hline
%   P(\;send\;|\;0.0) =& 1.00 \\
%   P(\;send\;|\;0.5) =& 1.00 \\
%   P(\;send\;|\;1.0) =& 0.98 \\
%   P(\;send\;|\;1.5) =& 0.92 \\
%   P(\;send\;|\;2.0) =& 0.73 \\
%   P(\;send\;|\;2.5) =& 0.38 \\
%   P(\;send\;|\;3.0) =& 0.12 \\
%   P(\;send\;|\;3.5) =& 0.03 \\
%   P(\;send\;|\;4.0) =& 0.01 \\
%   P(\;send\;|\;4.5) =& 0.00 \\


% \end{tabular}
% \end{center}

% TODO look into computing share of the bandwidth, as described in propshare.

\subsubsection{BitSwap Ledger}

BitSwap nodes keep ledgers accounting the transfers with other nodes. This allows nodes to keep track of history, and to avoid tampering. When activating a connection, BitSwap nodes exchange their ledger information. If it does not match exactly, the ledger is reinitialized from scratch, loosing the accrued credit or debt.  It is possible for malicious nodes to purposefully ``loose'' the Ledger, hoping the erase debts. It is unlikely that nodes will have accrued enough debt to warrant also losing the accrued trust, however the partner node is free to count it as \textit{misconduct} (discussed later).

\begin{verbatim}
      type Ledger struct {
        owner      NodeId
        partner    NodeId
        bytes_sent int
        bytes_recv int
        timestamp  Timestamp
      }
\end{verbatim}

Nodes are free to keep the ledger history, though it is not necessary for
correct operation. Only the current ledger entries are useful. Nodes are
also free to garbage collect ledgers as necessary, starting with the less
useful ledgers: the old (peers may not exist anymore) and small.

\subsubsection{BitSwap Specification}

BitSwap nodes follow a simple protocol.

\begin{verbatim}
    // Additional state kept
    type BitSwap struct {
      ledgers map[NodeId]Ledger
      // Ledgers known to this node, inc inactive

      active map[NodeId]Peer
      // currently open connections to other nodes

      need_list []Multihash
      // checksums of blocks this node needs

      have_list []Multihash
      // checksums of blocks this node has
    }

    type Peer struct {
      nodeid NodeId
      ledger Ledger
      // Ledger between the node and this peer

      last_seen Timestamp
      // timestamp of last received message

      want_list []Multihash
      // checksums of all blocks wanted by peer
      // includes blocks wanted by peer's peers
    }

    // Protocol interface:
    interface Peer {
      open (nodeid :NodeId, ledger :Ledger);
      send_want_list (want_list :WantList);
      send_block (block :Block) -> (complete :Bool);
      close (final :Bool);
    }
\end{verbatim}


Sketch of the lifetime of a peer connection:
\begin{enumerate}
  \item Open: peers send \texttt{ledgers} until they agree.
  \item Sending: peers exchange \texttt{want\_lists} and \texttt{blocks}.
  \item Close: peers deactivate a connection.
  \item Ignored: (special) a peer is ignored (for the duration of a timeout)
        if a node's strategy avoids sending

\end{enumerate}

\paragraph{Peer.open(NodeId, Ledger)}

When connecting, a node initializes a connection with a
\texttt{Ledger}, either stored from a connection in the past or a new one
zeroed out. Then, sends an Open message with the \texttt{Ledger} to the peer.

Upon receiving an \texttt{Open} message, a peer chooses whether to activate
the connection. If -- acording to the receiver's \texttt{Ledger} -- the sender
is not a trusted agent (transmission below zero, or large outstanding debt) the
receiver may opt to ignore the request. This should be done probabilistically
with an \texttt{ignore\_cooldown} timeout, as to allow errors to be corrected
and attackers to be thwarted.

If activating the connection, the receiver initializes a Peer object, with the
local version of the \texttt{Ledger}, and setting the \texttt{last\_seen}
timestamp). Then, it compares the received
\texttt{Ledger} with its own. If they match exactly, the connections have
opened. If they do not match, the peer creates a new zeroed out
\texttt{Ledger}, and sends it.


\paragraph{Peer.send\_want\_list(WantList)}

While the connection is open, nodes advertise their
\texttt{want\_list} to all connected peers. This is done (a) upon opening the
connection, (b) after a randomized periodic timeout, (c) after a change in
the \texttt{want\_list} and (d) after receiving a new block.

Upon receiving a \texttt{want\_list}, a node stores it. Then, it checks whether
it has any of the wanted blocks. If so, it sends them according to the
\textit{BitSwap Strategy} above.

\paragraph{Peer.send\_block(Block)}

Sending a block is straightforward. The node simply transmits the block of
data. Upon receiving all the data, the receiver computes the Multihash
checksum to verify it matches the expected one, and returns confirmation.

Upon finalizing the correct transmission of a block, the receiver moves the
block from \texttt{need\_list} to \texttt{have\_list}, and both the receiver
and sender update their ledgers to reflect the additional bytes transmitted.

If a transmission verfication fails, the receiver instead \textit{penalizes}
the sender. Both receiver and sender should update their ledgers accordingly,
though the sender is either malfunctioning or attacking the receiver. Note that
BitSwap expects to operate on a reliable transmission channel, so data errors
-- which could lead to incorrect penalization of an honest sender -- are
expected to be caught before the data is given to BitSwap. IPFS uses the uTP
protocol.

\paragraph{Peer.close(Bool)}

The \texttt{final} parameter to \texttt{close} signals whether the intention
to tear down the connection is the sender's or not. If false, the receiver
may opt to re-open the connection immediatelty. This avoids premature
closes.

A peer connection should be closed under two conditions:
\begin{itemize}
  \item a \texttt{silence\_wait} timeout has expired without receiving any
        messages from the peer (default BitSwap uses 30 seconds).
        The node issues \texttt{Peer.close(false)}.
  \item the node is exiting and BitSwap is being shut down.
        In this case, the node issues \texttt{Peer.close(true)}.
\end{itemize}

After a \texttt{close} message, both receiver and sender tear down the
connection, clearing any state stored. The \texttt{Ledger} may be stored for
the future, if it is useful to do so.

\paragraph{Notes}

\begin{itemize}
  \item Non-\texttt{open} messages on an inactive connection should be ignored.
        In case of a \texttt{send\_block} message, the receiver may check
        the block to see if it is needed and correct, and if so, use it.
        Regardless, all such out-of-order messages trigger a
        \texttt{close(false)} message from the receiver, to force
        re-initialization of the connection.
\end{itemize}

% TODO: Rate Limiting / Node Silencing

\subsection{Object Merkle DAG}

The DHT and BitSwap allow IPFS to form a massive peer-to-peer system for storing and distributing blocks quickly and robustly to users. On top of these, IPFS builds a Merkle DAG, a directed acyclic graph where links between objects are cryptographic hashes of the targets embedded in the sources. This is a generalization of which the Git data structure is a special case, and upon which it can be built. Merkle DAGs provide IPFS many useful properties, including:

\begin{enumerate}
  \item \textbf{Content Addressing:} all content is uniquely identified by its
        \texttt{multihash} checksum, \textbf{including links}.
  \item \textbf{Tamper resistance:} all content is verified with its checksum.
        If data is tampered with or corrupted, IPFS detects it.
  \item \textbf{Deduplication:} all objects who hold the exact same content
        are equal, and only stored once. This is particularly useful with
        index objects, such as git \texttt{trees} and \texttt{commits}, or common portions of data.
\end{enumerate}

The IPFS Object format is:

\begin{verbatim}

    type IPFSLink struct {
      Name string
      // name or alias of this link

      Hash Multihash
      // cryptographic hash of target

      Size int
      // total size of target
    }

    type IPFSObject struct {
      links []IPFSLink
      // array of links

      data []byte
      // opaque content data
    }

\end{verbatim}


The IPFS Merkle DAG is an extremely flexible way to store data. The only requirements are that object references be (a) content addressed, and (b) encoded in the format above. IPFS grants applications complete control over the data field; applications can use any custom data format they chose, which IPFS may not understand. The separate in-object link table allows IPFS to:

\begin{itemize}

  \item List all object references in an object. For example:
\begin{verbatim}
> ipfs ls /XLaoVHd834v62UsW56jew8Mp6FgZBXnZEeL
XLMLiUaCc7jh3eGFsNR8AhvRSSFySSvTaNb 47 bam
XLMCA8WXBNRBwFhzRnHgHFLwGmQzkAQELH7 6 bar
XLM1ZETht3wv8vUPXMkx3JZGP5T9txAz782 6 baz

<object multihash> <object size> <link name>
\end{verbatim}

  \item Resolve string path lookups, such as \texttt{foo/bar/baz}. Given an object, IPFS resolves the first path component to a hash in the object's link table, fetching that second object, and repeats with the next component. Thus, string paths can walk the Merkle DAG no matter what the data formats are.

  \item Resolve all objects referenced recursively:
\begin{verbatim}
> ipfs refs --recursive \
  /XLZ1625Jjn7SubMDgEyeaynFuR84ginqvzb
XLLxhdgJcXzLbtsLRL1twCHA2NrURp4H38s
XLYkgq61DYaQ8NhkcqyU7rLcnSa7dSHQ16x
XLHBNmRQ5sJJrdMPuu48pzeyTtRo39tNDR5
XLWVQDqxo9Km9zLyquoC9gAP8CL1gWnHZ7z
...
\end{verbatim}

\end{itemize}


A raw data field and a common link structure are the necessary components for constructing arbitrary data structures on top of IPFS. While it is easy to see how the Git object model fits on top of this DAG, consider these other potential data structures:
(a) key-value stores
(b) traditional relational databases
(c) Linked Data triple stores
(d) linked document publishing systems
(e) linked communications platforms
(f) cryptocurrency blockchains.
These can all be modeled on top of the IPFS Merkle DAG, which allows any of these systems to use IPFS as a transport protocol for more complex applications.

\subsubsection{Object-level Cryptoraphy}

IPFS is equipped to handle object-level cryptographic operations. An encrypted or signed object is wrapped in a special frame that allows encryption or verification of the raw bytes.

\begin{verbatim}
    type EncryptedObject struct {
      Object []bytes
      // raw object data encrypted

      Tag []bytes
      // optional tag for encryption groups
    }

    type SignedObject struct {
      Object []bytes
      // raw object data signed

      Signature []bytes
      // hmac signature

      PublicKey []multihash
      // multihash identifying key
    }
\end{verbatim}

Note this changes the object's hash (defining a different object, as it should). Also, IPFS automatically verifies signatures and can decrypt data with user-specified keychains.


\subsection{Files}

IPFS defines a set of objects to build a versioned filesystem on top of the
MerkleDAG, constructing files and directories out of Objects.


Files in IPFS are represented as a collection of inter-related objects, like in
the version control system Git. Each object is addressed by the cryptographic
hash of its contents (\texttt{Checksum}). The file objects are:

\begin{enumerate}
  \item \texttt{block}: a variable-size block of data.
  \item \texttt{list}: a collection of blocks or other lists.
  \item \texttt{tree}: a collection of blocks, lists, or other trees.
  \item \texttt{commit}: a snapshot in the version history of a tree.
\end{enumerate}

We hoped to use the Git object formats exactly, but had to depart to introduce
certain features useful in a distributed filesystem, for example fast size
lookups (aggregate byte sizes have been added to objects), large file
deduplication and versioning (adding a \texttt{list} object), and more.
However, our objects are perfectly compatible with Git and
conversion between the two does not lose any information.

Notes:
\begin{itemize}
  \item \texttt{varint} is a variable size int, as in protocol-buffers.
  \item objects are serialized using \texttt{capnp}.
\end{itemize}

\subsubsection{Block Object}

The \texttt{Block} object contains an addressable unit of data, and
represents a file.
IPFS Blocks are like Git blobs or filesystem data blocks. They store the
users' data. (The name \textit{block} is preferred over \textit{blob}, as the
Git-inspired view of a \textit{blob} as a \textit{file} breaks down in IPFS.
IPFS files can be represented by both \texttt{lists} and \texttt{blocks}.)
Format:
\begin{verbatim}
block <size>
<block data bytes>
...
\end{verbatim}


\subsubsection{List Object}

The \texttt{List} object represents a large or de-duplicated file made up of
several IPFS \texttt{Blocks} concatenated together. \texttt{Lists} contain
an ordered sequence of \texttt{block} or \texttt{list} objects.
In a sense, the IPFS \texttt{List} functions like a filesystem file with
indirect blocks. Since \texttt{lists} can contain other \texttt{lists}, topologies including linked lists and balanced trees are possible. Directed graphs where the same node appears in multiple places allow in-file deduplication. Cycles are not possible (enforced by hash addessing).
Format:
\begin{verbatim}
list <num objects> <size varint>
<list or block> <checksum> <size varint>
<list or block> <checksum> <size varint>
...
\end{verbatim}


\subsubsection{Tree Object}

The \texttt{tree} object in IPFS is similar to Git trees: it represents a
directory, a list of checksums and names. The checksums reference \texttt{blob}
or other \texttt{tree} objects. Note that traditional path naming
is implemented entirely by the \texttt{tree} objects. \texttt{Blocks} and
\texttt{lists} are only addressed by their \texttt{checksums}.
Format:
\begin{verbatim}
tree <num objects> <size varint>
<tree or list or block> <checksum> <size varint> <name>
<tree or list or block> <checksum> <size varint> <name>
...
\end{verbatim}

\subsubsection{Commit Object}

The \texttt{commit} object in IPFS is similar to Git's. It represents a
snapshot in the version history of a \texttt{tree}. Note that user
addresses are NodeIds (the hash of the public key).

\begin{verbatim}
commit <size varint>
parent <commit checksum>
tree <tree checksum>
author <author public key> <ISO UTC date>
committer <committer public key> <ISO UTC date>
<commit message>
\end{verbatim}

\subsubsection{Version control}

The \texttt{commit} object represents a particular snapshot in the version
history of a tree. Comparing the \texttt{trees} and children objects of two
different commits reveals the differences between two versions of the
filesystem. As long as a single \texttt{commit} and all the children objects
it references are accessible, all preceding versions are retrievable and the
full history of the filesystem changes can be accessed. This is a consequence
of the \texttt{Git} object model and the graph it forms.

The full power of the \texttt{Git} version control tools is available to IPFS
users. The object model is compatible (though not the same). The standard
\texttt{Git} tools can be used on the \texttt{IPFS} object graph after a
conversion. Additionally, a fork of the tools is under development that will
allow users to use them directly without conversion.


\subsection{The Filesystem}

\subsubsection{Filesystem Paths}

IPFS exposes a slash-delimited path-based API. Paths work the same as in any
traditional UNIX filesystem. Path subcomponents have different meanings per
object:

\begin{center}
\begin{tabular}{ll}
  \texttt{object} & subcomponent meaning \\
  \hline
  \hline
  \texttt{block}  & N/A (no children) \\
  \texttt{list}   & integer index \\
  \texttt{tree}   & string name \\
  \texttt{commit} & string name (in tree) \\
\end{tabular}
\end{center}

\begin{figure}
\centering
\begin{tikzpicture}[->,>=stealth',auto,thick,
  minimum height=2em,minimum width=5em]

  \tikzstyle{ghost}=[rectangle,rounded corners=.8ex];
  \tikzstyle{block}=[rectangle,draw,fill=blue!20,rounded corners=.8ex];
  \tikzstyle{list}=[rectangle,draw,fill=cyan!20,rounded corners=.8ex];
  \tikzstyle{tree}=[rectangle,draw,fill=green!20,rounded corners=.8ex];
  \tikzstyle{commit}=[rectangle,draw,fill=magenta!20,rounded corners=.8ex];
  \tikzstyle{every path}=[draw]

  \node[commit] (ccc111) {ccc111};
  \node[tree]   (ttt111) [below=3em of ccc111] {ttt111};
  \node[tree]   (ttt222) [below left=3em and 3em of ttt111] {ttt222};
  \node[tree]   (ttt333) [below=3em of ttt111] {ttt333};
  \node[ghost]  (ghost1) [below right=3em and 3em of ttt111] {};
  \node[list]   (lll111) [below=3em of ttt333] {lll111};
  \node[block]  (bbb111) [below=3em of ttt222] {bbb111};
  \node[block]  (bbb222) [below right=3em and 3em of ttt333] {bbb222};
  \node[block]  (bbb333) [below left=3em and 3em of lll111] {bbb333};
  \node[block]  (bbb444) [below=3em of lll111] {bbb444};
  \node[block]  (bbb555) [below right=3em and 3em of lll111] {bbb555};

  \path[every node/.style={font=\sffamily\small}]
    (ccc111) edge[out=-90,in=90] (ttt111)
    (ttt111) edge[out=-90,in=90] (ttt222)
             edge[out=-90,in=90] (ttt333)
             to  [out=-90,in=90]  (ghost1)
             to  [out=-90,in=90] (bbb222)
    (ttt222) edge[out=-90,in=90] (bbb111)
    (ttt333) edge[out=-90,in=90] (lll111)
             edge[out=-90,in=90] (bbb222)
    (lll111) edge[out=-90,in=90] (bbb333)
             edge[out=-90,in=90] (bbb444)
             edge[out=-90,in=90] (bbb555)
  ;

\end{tikzpicture}
\caption{Sample Object Graph} \label{fig:sample-object-graph}

\begin{verbatim}
    # ccc111 contents
    commit 313
    tree ttt111
    author <author public key> <ISO UTC date>
    committer <committer public key> <ISO UTC date>

    # ttt111 contents
    tree 3 250
    tree ttt222 46 ttt222-name
    tree ttt333 166 ttt333-name
    block bbb222 11 bbb222-name

    # ttt222 contents
    tree 1 10
    block bbb111 10 bbb111-name

    # ttt333 contents
    tree 2 104
    list lll111 93 lll111-name
    block bbb222 11 bbb222-eman

    # lll111 contents
    list 3 39
    block bbb333 12
    block bbb444 13
    block bbb555 14

    # bbb111 contents      # block bbb222 contents
    block 1                block 2
    1                      22

    # bbb333 contents      # block bbb444 contents
    block 3                block 4
    333                    4444

    # bbb555 contents
    block 5
    55555
\end{verbatim}
\caption{Sample Objects} \label{fig:sample-objects}
\end{figure}

For example, given the sample objects in Figures \ref{fig:sample-object-graph} and \ref{fig:sample-objects}:

\begin{verbatim}
    # to access tree ttt333:
    ccc111/ttt333-name

    # to access block bbb222:
    ccc111/bbb222-name
    ccc111/ttt333-name/bbb222-eman

    # to access list lll111:
    ccc111/ttt333-name/lll111-name

    # to access block bbb555:
    ccc111/ttt333-name/lll111-name/2
\end{verbatim}

Note that:
\begin{itemize}
  \item[(a)] blocks have no children \\
             \texttt{.../<block>/<child>} is impossible
  \item[(b)] commits implicitly access their trees \\
             \texttt{.../<commit>/name}
             looks up \texttt{"name"} in \texttt{<commit>}'s \texttt{<tree>}
  \item[(c)] \texttt{list} children are accessed by their index \\
             \texttt{.../<list>/4} looks up the fifth block.
\end{itemize}

\paragraph{Path Lookup Performance}

Path-based access traverses the object graph. Retrieving
each object requires potentially looking up its key in the DHT,
connecting to peers, and retrieving its blocks. This is considerable
overhead, particularly when looking up paths with many components.
This is mitigated by:
\begin{itemize}
  \item \textbf{tree caching}: since all objects are hash-addressed, they
        can be cached indefinitely. Additionally, \texttt{trees} tend to be
        small in size so IPFS prioritizes caching them over \texttt{blocks}.
  \item \textbf{flattened trees}: for any given \texttt{tree}, a special
        \texttt{flattened tree} can be constructed to list all objects
        reachable from the \texttt{tree}. Figure \ref{flattened-ttt111} shows
        an example of a flattened tree. While IPFS does not construct flattened
        trees by default, it provides a function for users. For example,
\end{itemize}

\begin{figure}
\begin{verbatim}
  tree 5 250
  tree ttt222 46 ttt222-name
  block bbb111 10 ttt222-name/bbb111-name
  tree ttt333 166 ttt333-name
  list lll111 93 ttt222-name/lll111-name
  block bbb222 11 ttt333-name/bbb222-eman
  block bbb222 11 bbb222-name
\end{verbatim}
\caption{Flattened Tree for \texttt{ttt111}} \label{fig:flattened-ttt111}
\end{figure}


\subsubsection{Publishing Objects}

IPFS is globally distributed. It is designed to allow the files of millions
of users to coexist together. The \textbf{DHT} with content-hash addressing
allows publishing objects in a fair, secure, and entirely distributed way.
Anyone can publish an object by simply adding its key to the DHT, adding
themselves as a peer, and giving other users the object's hash.

Additionally, the IPFS root directory supports special functionality to
allow namespacing and naming objects in a fair, secure, and distributed
manner.
\begin{itemize}
  \item[(a)] All objects are accessible by their hash. Thus, users can
        always reference an object (and its children) using
        \texttt{/<object\_hash>}.

  \item[(b)] \texttt{/<node\_id>} provides a self-certifying filesystem
        for user \texttt{node\_id}. If it exists, the object returned is a
        special \texttt{tree} signed by \texttt{node\_id}'s private key. Thus,
        a user can publish a \texttt{tree} or \texttt{commit} under their
        name, and others can verify it by checking the signature matches.

  \item[(c)] If \texttt{/<domain>} is a valid domain name, IPFS
        looks up key \texttt{gfs} in its \texttt{DNS TXT} record. IPFS
        interprets the value as either an object hash or another IPFS path:
        \begin{verbatim}
  # this DNS TXT record
  fs.benet.ai. TXT "gfs=/aabbccddeeffgg ..."

  # behaves as symlink
  ln -s /aabbccddeeffgg /fs.benet.ai
        \end{verbatim}

\end{itemize}


\subsection{Local Objects}

IPFS clients require some \textit{local storage}, an external system
on which to store and retrieve local raw data for the objects IPFS manages.
The type of storage depends on the node's use case.
In most cases, this is simply a portion of disk space (either managed by
the native filesystem, or directly by the IPFS client). In others, non-
persistent caches for example, this storage is just a portion of RAM.

Ultimately, all blocks available in IPFS are in some node's
\textit{local storage}. And when nodes open files with IPFS, the objects are
downloaded and stored locally, at least temporarily. This provides
fast lookup for some configurable amount of time thereafter.

\subsubsection{Object Pinning}

Nodes who wish to ensure the survival of particular objects can do so by
\texttt{pinning} the objects. This ensures the objects are kept in the node's
\textit{local storage}. Pinning can be done recursively, to pin down all
descendent objects as well. For example, recursively pinning a \texttt{tree}
or \texttt{commit} ensures \textit{all} objects pointed to are stored locally
too. This is particularly useful for nodes wishing to keep all their own files.


\section{Acknowledgments}

IPFS is the synthesis of many great ideas and systems. It would be impossible to dare such ambitious goals without standing on the shoulders of such giants. Personal thanks to David Dalrymple, Joe Zimmerman, and Ali Yahya for long discussions on many of these ideas, in particular: exposing the general Merkle DAG (David, Joe), rolling hash blocking (David), and s/kademlia sybill protection (David, Ali). And special thanks to David Mazieres, for his ever brilliant ideas.

%\bibliographystyle{abbrv}
%\bibliography{gfs}
%\balancecolumns
%\subsection{References}
\end{document}